1967 Chevy C10 Pickup DIY Kit: Body Finish and Wheel-Size Planning

Written by

The Diecast Guide

The Diecast Guide and MuncleMikes share ownership. Read our retailer disclosures.

1967 Chevy C10 Pickup DIY Kit: Body Finish and Wheel-Size Planning

MuncleMikes supplies this 1967 Chevy C10 Pickup as a stripped Hot Wheels DIY kit. The casting is ready for a buyer-selected paint finish, detailing, and reassembly. Its listed factory reference uses 10mm front wheels and 12mm rear wheels, so wheel planning deserves attention before ordering a replacement set.

Product facts

Original toy brand	Hot Wheels
Casting	1967 Chevy C10 Pickup
Preparation	Stripped, ready to paint
Assembly	Click-together design; model glue may add hold
Listed factory wheel reference	10mm front / 12mm rear; not a fit guarantee
Custom wheels	Sold separately

Choose the project around the pickup casting

The named C10 body is the fixed starting point; the finish is your decision. Plan the body color and detail work first, then select compatible primer, paint, and clear coat for that approach. The product details do not give a universal paint system or curing time.

Interior, window, and original wheel colors can vary. If a specific combination is essential to the design, check the current kit details before committing to it. The 1967 designation names the represented vehicle rather than a verified Hot Wheels release year.

Understand the different front and rear reference sizes

A four-wheel set with every wheel listed at 10mm does not reproduce the seller’s 10mm-front, 12mm-rear reference. That does not by itself establish whether an alternative set will or will not work. It means you need to decide what arrangement you want and check the parts against the body and base.

Measure wheel width, axle length, inner spacing, and clearance as well as diameter. The merchant’s reference is not an independent fit test for a particular replacement brand. Dry-fit before final assembly and check that the wheels can turn without contacting surrounding parts.

Budget for the whole build

Custom wheels are explicitly separate from the kit. Confirm the remaining supplies you need before comparing its cost with a completed custom pickup. A prepared casting, finishing products, optional detailing, and wheel choices represent different parts of the project, and another seller’s package may include a different combination.

Questions before buying

Is the C10 already painted?

No. The listing describes a stripped casting prepared for painting, detailing, and reassembly.

What wheel sizes does the listing reference?

It lists 10mm at the front and 12mm at the rear as a factory setup reference, not a universal replacement specification.

Is model glue required?

The retailer describes a click-together design and says model glue can provide extra hold. It does not list glue as an included item.

Check retailer offers

View at MuncleMikes

Check the selected model, current availability, delivered total, and return terms at the retailer before ordering.

Product facts: MuncleMikes product listing, checked October 23, 2026. Collector and comparison guidance is based on the published product details.