THE DIECAST
GUIDEFind a model

1940 Ford Drag Truck DIY Hot Wheels Kit: Build and Wheel-Fit Guide

Written by

The Diecast Guide

in

The Diecast Guide and MuncleMikes share ownership. Read our retailer disclosures.

1940 Ford Drag Truck DIY Hot Wheels Kit: Build and Wheel-Fit Guide

The 1940 Ford Drag Truck DIY Hot Wheels kit provides a stripped casting for painting and reassembly. It suits a build where you choose the final finish, with the source’s preparation and component notes defining the starting point.

Source specifications

Listed factory wheel reference 10 mm front / 12 mm rear
Original toy brand Hot Wheels
Casting 1940 Ford Drag Truck
Preparation Stripped casting for painting and reassembly
Included components One stripped 1940 Ford Drag Truck diecast body shell; Matching original chassis, interior, glazing and wheel assembly
Assembly Components supplied separated; model glue or rubber cement may be needed for a secure fit
Variation note Wheel style, interior color and window/glazing color may vary
Quantity One kit
Photo basis Representative kit for the named casting
Not included Primer, paint, clear coat, masking materials, adhesive, tools, replacement axles and custom wheels; Display scenery and the completed appearance shown by any background vehicle

Plan the wheel setup

The retailer’s factory wheel reference is 10 mm front / 12 mm rear. Treat this as a description of the recorded starting setup. It does not establish that a replacement with the same diameter label will fit the complete assembly.

Compare wheel diameter and width, axle length, inner spacing and clearance around the body. Dry-fit the components before final assembly, including a check that the wheels can rotate without rubbing.

Assembly and component choices

The body and original component assembly are supplied separately for finishing. The source says model glue or rubber cement may be needed for a secure fit. A test fit lets you check the join before painting and final assembly.

Wheel style, interior color and window or glazing color may vary. The named casting is the identity to match; confirm any particular component color with the retailer if it is central to the build you have planned.

Questions before choosing

Is this a finished painted custom?

The source describes a stripped DIY casting for painting, detailing and reassembly.

Which supplies or display pieces are excluded?

The source excludes primer, paint, clear coat, masking materials, adhesive, tools, replacement axles and custom wheels; Display scenery and the completed appearance shown by any background vehicle.

Where to find it

View at MuncleMikes

Use the retailer listing for current availability, photographs and purchase terms.

Source facts checked against the MuncleMikes catalog snapshot dated 2026-10-23. Fit and buying notes are editorial guidance; no hands-on test is claimed.

More to explore