THE DIECAST
GUIDE
Find a model

Category: Jada

  • Jada 33383: Flintmobile — The Flintstones 1:32 Guide

    Jada item 33383 identifies Flintmobile — The Flintstones in 1:32 scale. It belongs to the Hollywood Rides series. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 33383
    Scale 1:32
    Subject Flintmobile — The Flintstones
    Series Hollywood Rides
    Approximate dimensions 3.25 × 2.25 × 2.25 inches, length × width × height

    Features and contents

    • Body features: No opening panels

    Display and buying notes

    This release has no opening panels, so its exterior and decoration are the main display considerations. Compare the named subject and finish when choosing among versions of the same vehicle.

    Use the approximate dimensions in the specification table to plan the display space, allowing room to place or remove the model. Matching scale alone does not establish equal physical size.

    Questions about this release

    Does this release have opening panels?

    The source explicitly describes no opening panels.

    Which item identifies this Jada release?

    Use manufacturer item 33383 with 1:32 scale and the stated subject.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 35591: 1959 Chevrolet Impala lowrider 1:24 Guide

    Jada item 35591 identifies 1959 Chevrolet Impala lowrider in 1:24 scale. The stated finish is candy purple. It belongs to the Street Low series. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 35591
    Scale 1:24
    Subject 1959 Chevrolet Impala lowrider
    Finish candy purple
    Series Street Low
    Approximate dimensions approximately 8 × 2.75 × 2.25 inches, length × width × height

    Features and contents

    • Tires: Rubber
    • Construction: diecast with plastic components
    • Detailing: cabin

    Display and buying notes

    Use the approximate dimensions in the specification table to plan the display space, allowing room to place or remove the model. Matching scale alone does not establish equal physical size.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Jada 35592: 1959 Chevrolet Impala lowrider 1:24 Guide 1:24 Finish: green metallic with cream top; Item: 35592
    Jada 98426: Dom's Chevrolet Impala 1:24 Guide 1:24 Finish: Red; Item: 98426
    Maisto 32547BL: 1964 Chevrolet Impala SS Lowrider 1:26 Guide 1:26 Scale: 1:26; Finish: Candy blue with graphics and white interior; Item: 32547BL

    Questions about this release

    What construction is specified?

    Diecast with plastic components. Use that stated construction when comparing versions of the same subject.

    Which item identifies this Jada release?

    Use manufacturer item 35591 with 1:24 scale and the candy purple finish.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 34190: 2020 Jeep Gladiator Rubicon 1:24 Guide

    Jada item 34190 identifies 2020 Jeep Gladiator Rubicon in 1:24 scale. The stated finish is red with black top. It belongs to the Just Trucks series. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 34190
    Scale 1:24
    Subject 2020 Jeep Gladiator Rubicon
    Finish red with black top
    Series Just Trucks
    Barcode 801310341902

    Features and contents

    • Tires: Rubber

    Display and buying notes

    For a display already built around 1:24 models, retain that scale in the comparison. Use actual measurements for fitted cases and scenery; matching scale alone does not establish equal physical dimensions.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Jada 33363: 2020 Jeep Gladiator & Colossus Figure – X-Men 1:32 Guide 1:32 Scale: 1:32; Item: 33363

    Questions about this release

    Which item identifies this Jada release?

    Use manufacturer item 34190 with 1:24 scale and the red with black top finish.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 34851: 2017 Ford GT 1:32 Guide

    Jada item 34851 identifies 2017 Ford GT in 1:32 scale. The stated finish is gray metallic and pink gradient. It belongs to the Pink Slips series. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 34851
    Scale 1:32
    Subject 2017 Ford GT
    Finish gray metallic and pink gradient
    Series Pink Slips

    Features and contents

    • Tires: Rubber
    • Detailing: cabin

    Display and buying notes

    For a display already built around 1:32 models, retain that scale in the comparison. Use actual measurements for fitted cases and scenery; matching scale alone does not establish equal physical dimensions.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Jada 36916: 2017 Ford GT Boba Fett Star Wars 1:32 Guide 1:32 Item: 36916
    Jada 30291: 2017 Ford GT 1:32 Guide 1:32 Finish: red and blue with themed graphics; Item: 30291
    Jada 33360: 2017 Ford GT & Doctor Strange Figure – Marvel 1:32 Guide 1:32 Item: 33360

    Questions about this release

    Which item identifies this Jada release?

    Use manufacturer item 34851 with 1:32 scale and the gray metallic and pink gradient finish.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 35365: Lamborghini Centenario 1:32 Guide

    Jada item 35365 identifies Lamborghini Centenario in 1:32 scale. The stated finish is light blue and purple. It belongs to the Pink Slips series. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 35365
    Scale 1:32
    Subject Lamborghini Centenario
    Finish light blue and purple
    Series Pink Slips
    Approximate dimensions approximately 5.125 × 2 × 1 inches, length × width × height

    Features and contents

    • Opening features: doors
    • Tires: Rubber
    • Detailing: interior and exterior

    Display and buying notes

    Allow clearance for the listed opening parts. Measure the model with those parts positioned as you intend to display them before choosing a close-fitting case.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Maisto 31386OR: Lamborghini Centenario Orange/Matte Black 1:18 Guide 1:18 Scale: 1:18; Finish: Orange with Matte Black Top; Item: 31386OR
    Maisto 31386GRN: Lamborghini Centenario Lime Green with Matte Black Top 1:18 Guide 1:18 Scale: 1:18; Finish: Green with Matte Black Top; Item: 31386GRN

    Questions about this release

    Which parts are described as opening?

    The source lists doors. Allow clearance around those parts if you plan to display them open.

    Which item identifies this Jada release?

    Use manufacturer item 35365 with 1:32 scale and the light blue and purple finish.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 30916: Animated Series Batmobile & Batman Figure #30916 1:24 Guide

    Jada item 30916 identifies Animated Series Batmobile & Batman Figure #30916 in 1:24 scale. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 30916
    Scale 1:24
    Subject Animated Series Batmobile & Batman Figure #30916
    Approximate dimensions approximately 9.5 × 3.25 × 1.75 inches, length × width × height

    Features and contents

    • Opening features: hood
    • Tires: Rubber
    • Construction: diecast and plastic components
    • Detailing: interior and exterior

    Display and buying notes

    Allow clearance for the listed opening parts. Measure the model with those parts positioned as you intend to display them before choosing a close-fitting case.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Jada 33091: 1965 Shelby Cobra 427 S/C #2 & Two-Face Figure – Batman 1:32 Guide 1:32 Scale: 1:32; Item: 33091

    Questions about this release

    Which parts are described as opening?

    The source lists hood. Allow clearance around those parts if you plan to display them open.

    What construction is specified?

    Diecast and plastic components. Use that stated construction when comparing versions of the same subject.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 35426: 1951 Mercury & The Creep Figure – Creepshow #35426 1:24 Guide

    Jada item 35426 identifies 1951 Mercury & The Creep Figure – Creepshow #35426 in 1:24 scale. The stated finish is matte red with purple stripes. It belongs to the Hollywood Rides series. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 35426
    Scale 1:24
    Subject 1951 Mercury & The Creep Figure – Creepshow #35426
    Finish matte red with purple stripes
    Series Hollywood Rides
    Approximate dimensions approximately 8 × 3 × 2 inches, length × width × height

    Features and contents

    • Opening features: hood, doors, trunk
    • Tires: Rubber
    • Construction: diecast with plastic components
    • Included pieces: The figure is included with the car
    • Detailing: cabin and exterior

    Display and buying notes

    Allow clearance for the listed opening parts. Measure the model with those parts positioned as you intend to display them before choosing a close-fitting case.

    Compare the complete contents when checking sellers. A vehicle-only offer and a set with the listed companion pieces have different contents, even when the principal vehicle matches.

    Questions about this release

    Which parts are described as opening?

    The source lists hood, doors, trunk. Allow clearance around those parts if you plan to display them open.

    What companion pieces are listed?

    The figure is included with the car. A vehicle-only offer would have different contents.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 35029: 1969 Chevrolet Camaro 1:24 Guide

    Jada item 35029 identifies 1969 Chevrolet Camaro in 1:24 scale. The stated finish is red with graphics. It belongs to the Bigtime Muscle series. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 35029
    Scale 1:24
    Subject 1969 Chevrolet Camaro
    Finish red with graphics
    Series Bigtime Muscle
    Approximate dimensions approximately 8 × 3 × 2.375 inches, length × width × height

    Features and contents

    • Tires: Rubber
    • Detailing: interior, exterior

    Display and buying notes

    Use the approximate dimensions in the specification table to plan the display space, allowing room to place or remove the model. Matching scale alone does not establish equal physical size.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Jada 30298: 2016 Chevrolet Camaro 1:32 Guide 1:32 Scale: 1:32; Finish: red and gold with themed graphics; Item: 30298
    Maisto 31512Y: 2017 Chevrolet Camaro ZL1 Yellow Metallic 1:24 Guide 1:24 Finish: Yellow Metallic; Item: 31512Y
    Maisto 31257BRNZ: 1968 Chevrolet Camaro SS 396 Convertible Bronze 1:24 Guide 1:24 Item: 31257BRNZ

    Questions about this release

    Which item identifies this Jada release?

    Use manufacturer item 35029 with 1:24 scale and the red with graphics finish.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 98296: Subaru WRX STI 1:24 Guide

    Jada item 98296 identifies Subaru WRX STI in 1:24 scale. The stated finish is white. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 98296
    Scale 1:24
    Subject Subaru WRX STI
    Finish white
    Approximate dimensions approximately 8 × 3.75 × 3 inches, length × width × height

    Features and contents

    • Tires: Rubber
    • Construction: diecast with plastic components
    • Detailing: cabin and exterior

    Display and buying notes

    Use the approximate dimensions in the specification table to plan the display space, allowing room to place or remove the model. Matching scale alone does not establish equal physical size.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Jada 34714: 2016 Subaru WRX STI and Yuji Itadori 1:24 Guide 1:24 Item: 34714
    Jada 38057 Subaru WRX STI: JDM Tuners 1:24 Guide 1:24 Finish: Blue metallic with yellow graphics; Item: 38057

    Questions about this release

    What construction is specified?

    Diecast with plastic components. Use that stated construction when comparing versions of the same subject.

    Which item identifies this Jada release?

    Use manufacturer item 98296 with 1:24 scale and the white finish.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.

  • Jada 97350: Dodge Charger R/T 1:32 Guide

    Jada item 97350 identifies Dodge Charger R/T in 1:32 scale. The stated finish is raw metal. Use this release reference when comparing retailers.

    Release specifications

    Specification Source detail
    Manufacturer Jada
    Manufacturer item 97350
    Scale 1:32
    Subject Dodge Charger R/T
    Finish raw metal

    Features and contents

    • Opening features: doors
    • Tires: Rubber
    • Construction: diecast metal with plastic components
    • Detailing: interior and exterior

    Display and buying notes

    Allow clearance for the listed opening parts. Measure the model with those parts positioned as you intend to display them before choosing a close-fitting case.

    Related releases to compare

    These are distinct releases. Compare the stated scale, finish and item reference for the display you want.

    Guide Scale What differs
    Jada 97040: 1970 Dodge Charger R/T Offroad 1:32 Guide 1:32 Item: 97040
    Jada 35423: 1970 Dodge Charger R/T in black 1:24 Guide 1:24 Scale: 1:24; Item: 35423
    Maisto 31256BL: 1969 Dodge Charger R/T Hemi Blue 1:25 Guide 1:25 Scale: 1:25; Item: 31256BL

    Questions about this release

    Which parts are described as opening?

    The source lists doors. Allow clearance around those parts if you plan to display them open.

    What construction is specified?

    Diecast metal with plastic components. Use that stated construction when comparing versions of the same subject.

    Where to find it

    Check the current offer, seller photographs and purchase terms on the retailer page.

    Product details come from the linked MuncleMikes catalog listing, checked October 23, 2026. Display notes are editorial guidance.